6.1 External masonry walls

Figure reference table

Figure reference table for chapter 6.1

Fig No Title/Description Clause
Figure 1 Lateral restraint by buttressing wall 6.1.3
Figure 2 Movement joint sealant 6.1.3
Figure 3 Lateral restraint and acoustics 6.1.5
Figure 4 Check reveal 6.1.6
Figure 5 Exposure zones 6.1.6
Figure 6 Frost exposure zones 6.1.6
Figure 7 Full fill insulation 6.1.7
Figure 8 Insulation to combined lintel ends 6.1.7
Figure 9 Cavity ties to rigid partial fill insulation 6.1.7
Figure 10 Internal to external wall bonded connection 6.1.11
Figure 11 Internal to external wall tied connection 6.1.11
Figure 12 Dissimilar masonry types 6.1.11
Figure 13 Masonry cavity wall plumb level 6.1.11
Figure 14 Striking of mortar 6.1.11
Figure 15 Rain penetration to mortar joints 6.1.11
Figure 16 Squareness of window openings 6.1.11
Figure 17 Masonry setting out at window openings 6.1.11
Figure 18 Corbelling 6.1.11
Figure 19 Masonry overhang to openings 6.1.12
Figure 20 Combined lintel 6.1.12
Figure 21 Separate lintels - reconstituted stone or concrete 6.1.12
Figure 22 Separate lintels - steel 6.1.12
Figure 23 Lintel end bearing 6.1.12
Figure 24 Masonry support 6.1.16
Figure 25 Low level DPC 6.1.17
Figure 26 Cavity tray to air brick/meter box 6.1.17
Figure 27 DPC to stone cill 6.1.17
Figure 28 Cavity tray to openings 6.1.17
Figure 29 Cavity tray stop ends and weepholes 6.1.17
Figure 30 Weepholes to inset gas meter box 6.1.17
Figure 31 Concrete cavity fill 6.1.17
Figure 32 Stepped horizontal DPC 6.1.17
Figure 33 DPC to flashing interface 6.1.17
Figure 34 Stepped cavity trays 6.1.17
Figure 35 Parapet walls 6.1.17
Figure 36 Copings/cappings to parapet walls 6.1.17
Figure 37 Parapet to external wall junction - DPC/cavity tray arrangement 6.1.17
Figure 38 Wall tie locations 6.1.18
Figure 39 Wall tie embedment 6.1.18
Figure 40 Wall tie to partial fill insulation 6.1.18

Last updated: 2nd January 2024

Back to top ⇧