6.5.4 Installation and support
Steelwork shall be installed to achieve the required structural performance. Issues to be taken into account include:
- section size and grade detailed in the design
- steelwork support.
Section size and grade detailed in the design#
When materials are delivered to site, they should be checked to ensure conformity with:
- engineer’s design, or
- steelwork sizes in this chapter.
Steelwork support#
Beam supports should not occur above window or door openings. Bearings for steelwork supported on masonry should be:
- 100mm minimum
- clean, dry and level.
Last updated: 2nd January 2024