Figure reference table
Figure reference table for chapter 7.2
| Fig No | Title/Description | Clause |
|---|---|---|
| Figure 1 | Trussed trimmed rafters | 7.2.3 |
| Figure 2 | Traditional roof members | 7.2.3 |
| Figure 3 | Pole plate | 7.2.3 |
| Figure 4 | Types of rafter | 7.2.3 |
| Figure 5 | Permissible truss projection | 7.2.6 |
| Figure 6 | Rafter to ceiling joist connection | 7.2.7 |
| Figure 7 | Rafter to purlin connection | 7.2.7 |
| Figure 8 | Purlin connection | 7.2.7 |
| Figure 9 | Scarf joint | 7.2.7 |
| Figure 10 | Angle tie | 7.2.7 |
| Figure 11 | Dragon tie | 7.2.7 |
| Figure 12 | Dragon tie (alternative) | 7.2.7 |
| Figure 13 | Diminishing truss supported by continuous binders | 7.2.7 |
| Figure 14 | Diminishing truss supported on long battens | 7.2.7 |
| Figure 15 | Lateral restraint strap secured to timber blocking | 7.2.8 |
| Figure 16 | Lateral restraint strap secured to longitudinal bracing | 7.2.8 |
| Figure 17 | Restraint by gable ladder – masonry | 7.2.8 |
| Figure 18 | Roof bracing – lap joint | 7.2.9 |
| Figure 19 | Roof bracing – wall plate connection | 7.2.9 |
| Figure 20 | Diagonal rafter bracing – square roofs | 7.2.9 |
| Figure 21 | Diagonal rafter bracing – larger roofs | 7.2.9 |
| Figure 22 | Diagonal rafter bracing – narrow fronted roofs | 7.2.9 |
| Figure 23 | Intersection detail | 7.2.9 |
| Figure 24 | Longitudinal bracing – ridge node | 7.2.9 |
| Figure 25 | Longitudinal bracing – rafter node | 7.2.9 |
| Figure 26 | Longitudinal binders – ceiling node | 7.2.9 |
| Figure 27 | Chevron bracing – duo pitched roof | 7.2.9 |
| Figure 28 | Mono-pitch truss - diagonal rafter bracing | 7.2.9 |
| Figure 29 | Mono-pitch truss - diagonal bracing to end vertical member | 7.2.9 |
| Figure 30 | Mono-pitch truss – longitudinal bracing | 7.2.9 |
| Figure 31 | Mono-pitch truss - chevron bracing | 7.2.9 |
| Figure 32 | Attic truss - diagonal bracing | 7.2.9 |
| Figure 33 | Attic truss – diaphragm bracing | 7.2.9 |
| Figure 34 | Attic truss – diaphragm bracing | 7.2.9 |
| Figure 35 | Attic truss – diaphragm bracing | 7.2.9 |
| Figure 36 | Attic truss – longitudinal bracing | 7.2.9 |
| Figure 37 | Dormer – rafter supported | 7.2.13 |
| Figure 38 | Dormer – floor supported | 7.2.13 |
| Figure 39 | Ventilation to dormer pitched roofs | 7.2.13 |
| Figure 40 | Room in roof (flat roof dormer) | 7.2.13 |
| Figure 41 | Underlay detailing | 7.2.14 |
| Figure 42 | Typical eaves ventilation | 7.2.15 |
| Figure 43 | Roof pitch 10° to 15° | 7.2.15 |
| Figure 44 | Roof pitch >15° and <75° | 7.2.15 |
| Figure 45 | Mono-pitched roof | 7.2.15 |
| Figure 46 | Hybrid roof - Room-in-roof | 7.2.15 |
| Figure 47 | Hybrid roof - Room in roof (flat roof dormer) | 7.2.15 |
| Figure 48 | Warm roof | 7.2.15 |
| Figure 49 | Cold roof – LR underlay with air permeable covering | 7.2.15 |
| Figure 50 | Warm roof - LR underlay with air permeable covering | 7.2.15 |
| Figure 51 | Hybrid roof - LR underlay with air permeable covering | 7.2.15 |
| Figure 52 | Cold pitched roof with flat roof apex | 7.2.15 |
| Figure 53 | Cold roof – Type LR underlay with air impermeable covering | 7.2.15 |
| Figure 54 | Warm roof – LR underlay with air impermeable covering | 7.2.15 |
| Figure 55 | Hybrid roof - LR underlay with air impermeable covering | 7.2.15 |
| Figure 56 | Ceiling penetrations | 7.2.15 |
| Figure 57 | Storage tank insulation | 7.2.15 |
| Figure 58 | Fire precautions | 7.2.16 |
| Figure 59 | Incorrect batten jointing | 7.2.17 |
| Figure 60 | Correct batten jointing – batten gauge >200mm | 7.2.17 |
| Figure 61 | Correct batten jointing – batten gauge ≤200mm | 7.2.17 |
| Figure 62 | Eaves detailing | 7.2.19 |
| Figure 63 | Mechanically fixed ridge | 7.2.19 |
| Figure 64 | Wet bedded ridge with dentil tiles | 7.2.19 |
| Figure 65 | Wet verge | 7.2.19 |
| Figure 66 | Verge - plain tiles | 7.2.19 |
| Figure 67 | Wall abutment | 7.2.20 |
| Figure 68 | Side abutment (double lap clay or concrete plain tile and slate) | 7.2.20 |
| Figure 69 | Side abutment gutter | 7.2.20 |
| Figure 70 | Dry valley - lead saddle | 7.2.20 |
| Figure 71 | Flat roof adjoining a pitched roof | 7.2.20 |
| Figure 72 | Chimney - back gutter | 7.2.20 |
| Figure 73 | Chimney penetration | 7.2.20 |
| Figure 74 | Raking coping - masonry | 7.2.20 |
| Figure 75 | Raking coping - framed structure | 7.2.20 |
Last updated: 2nd January 2024