6.8 Figure reference table
Figure reference table for chapter
Fig No | Title/Description | Clause |
---|---|---|
Figure 1 | Solid fuel hearth clearances | 6.8.3.1 |
Figure 2 | Solid fuel hearth clearances to wall | 6.8.3.2 |
Figure 3 | Solid fuel appliance clearances to wall | 6.8.3.2 |
Figure 4 | Solid fuel flue-pipe clearances | 6.8.5.2 |
Figure 5 | Solid fuel outlet positions | 6.8.7.1 |
Figure 6 | Chimney capping | 6.8.7.3 |
Figure 7 | Hearth clearances for back boilers | 6.8.8.2 |
Figure 8 | Gas flue pipe support distances | 6.8.10.1 |
Figure 9 | Gas precast flue blocks to ridge terminal — cross-section | 6.8.11.2 |
Figure 10 | Gas precast flue blocks to ridge terminal transition | 6.8.11.2 |
Figure 11 | Precast flue block cavity wall insulation and vertical DPM | 6.8.11.2 |
Figure 12 | Precast flue blocks — false chimney breast arrangement with insulated cavity wall | 6.8.11.2 |
Figure 13 | Gas flue terminal positions | 6.8.12 |
Figure 14 | Drip collar for circular flues — cross-section | 6.8.12 |
Figure 15 | Drip collar plate detail for rectangular flues — cross-section | 6.8.12 |
Figure 16 | Hearth clearances | 6.8.18 |
Figure 17 | Fireplace recess — external cavity wall projection | 6.8.18 |
Figure 18 | Fireplace recess — external cavity wall with dimensions | 6.8.18 |
Figure 19 | Fireplace recess — internal wall with dimensions | 6.8.18 |
Figure 20 | Appliance recess with raft lintel (freestanding heater), front and side view | 6.8.18 |
Figure 21 | Lintelled opening for inset open fire (chimney throat insert), front and side view | 6.8.18 |
Figure 22 | Throat unit connection to lintel | 6.8.20 |
Figure 23 | Chimney joint to connecting flue pipe | 6.8.20 |
Figure 24 | Socketed flue pipe (socket up) | 6.8.20 |
Figure 25 | Offset chimney with flue liner suitable for solid fuel | 6.8.21 |
Figure 26 | Calculating maximum chimney height to width | 6.8.23.1 |
Figure 27 | Plan view of fireplace recess with frame | 6.8.23.2 |
Figure 28 | Plan view of chimney at upper floor level — 40mm airspace where non-combustible material <200mm thick | 6.8.23.2 |
Figure 29 | Timber chimney frame construction | 6.8.23.2 |
Figure 30 | External chimney breast with masonry inner leaf | 6.8.23.2 |
Figure 31 | Joist and masonry requirements for Scotland | 6.8.23.2 |
Figure 32 | Chimney cavity tray at pitch | 6.8.23.2 |
Figure 33 | Chimney cavity tray — cross-section (gather) | 6.8.23.2 |
Figure 34 | Prefabricated chimney throating | 6.8.23.2 |
Figure 35 | Chimney flashing and DPC tray (chimney on outside wall) | 6.8.23.3 |
Figure 36 | Chimney flashing and DPC tray — stack at ridge | 6.8.23.3 |
Figure 37 | Combined with DPC tray and flashing | 6.8.23.3 |
Figure 38 | Purpose made chimney capping (cross section) | 6.8.28 |
Figure 39 | Chimney details with brick capping | 6.8.28 |
Last updated: 2nd January 2025