4.3 Figure reference table
Figure reference table for chapter 4.3
Fig No | Title/Description | Clause |
---|---|---|
Figure 1 | Minimum foundation depth below ground to give protection against frost damage | 4.3.3.3 |
Figure 2 | Minimum foundation setting out requirements | 4.3.5 |
Figure 3 | Diversion of land drains when interrupted by proposed development | 4.3.6.1 |
Figure 4 | Over-sized pipe cast as sleeve within foundations | 4.3.6.2 |
Figure 5 | Opening left in masonry above or near the top of foundation with lintel over | 4.3.6.2 |
Figure 6 | Opening left within deep trench fill foundation for service penetration | 4.3.6.2 |
Figure 7 | Typical foundation detail | 4.3.7.2 |
Figure 8 | Typical stepped foundation detail | 4.3.8 |
Figure 9 | Foundations with horizontal bottom and vertical sides and steps | 4.3.9.3 |
Figure 10 | Reinforced foundation showing reinforcement cover | 4.3.10 |
Figure 11 | Use of pegs to ensure correct foundation levels | 4.3.11 |
Figure 12 | Construction joint connected with reinforcing bars | 4.3.13 |
Figure 13 | Construction joint formed using expanded metal lath | 4.3.13 |
Last updated: 2nd January 2025